Replacing engine oil filter
1.
Use filter wrench to remove engine oil filter.
2.
Clean sealing surface on connecting piece.
3.
Check sealing ring (1) of new engine oil filter
and apply a thin coat of engine oil.
4.
Check inscription on filter: must be “Oil Fil-
ter”.
5.
Screw on and tighten engine oil filter by
hand.
6.
Replace other engine oil filters in the same
way.
Note:
• Observe the following instructions to avoid
engine damage: Adequate oil pressure for
an engine start is only provided when the
quick-start function is deactivated.
• See label (2) on filter housing.
7.
Make sure the quick-start function is deacti-
vated before starting the engine.
8.
Check engine oil level (→ Page 271).
276 | Oil Filtration / Cooling | MS15065/01E 2019-01
TIM-ID: 0000082264 - 004
