10.
Coat screw head mating face and thread of
hold-down clamp (2) with engine oil.
11.
Position hold-down clamp (1) correctly and use a torque wrench to tighten to specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Screw
M12
Tightening torque
100 Nm+10 Nm
12.
Undo hold-down clamp screw again.
Note:
Ensure immaculate cleanliness.
13.
Coat thread and sealing cone of adapter (3) with engine oil.
14.
Apply (Assembly compound (Kluthe Hakuform 30-15)) to O-rings on adapter (3).
15.
Install adapter (3).
16.
Use a torque wrench to tighten hold-down clamp screw (2) to specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Screw
M12
Tightening torque
100 Nm+10 Nm
17.
Use a torque wrench and long socket to tighten adapter (3) to specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Adapter
Tightening torque
100 Nm+10 Nm
Installing HP line
Note:
Ensure immaculate cleanliness.
1.
Coat thread and sealing cone on both ends of HP line (5) with engine oil.
2.
Thread in HP line (5), ensuring that the sealing areas are not damage.
3.
Tighten union nuts (4) and (6) as far as possible by hand.
4.
Use a torque wrench to tighten nuts (4, 6) to specified tightening torque in the following order. Tightening
sequence:
1 Nut on adapter (4)
2 Nut on rail (6)
Name
Size
Type
Lubricant
Value/Standard
Nut
Tightening torque
45 Nm +3 Nm
MS15065/01E 2019-01
| Injector | 217
TIM-ID: 0000079196 - 006
