5.
Unscrew nut (2) remove together with wash-
ers.
6.
Remove cover (1) and sealing ring.
7.
Replace filter element (3).
8.
Replace sealing ring as necessary.
9.
Install sealing ring and cover (1).
10.
Screw on new nut (2) with new washers and tighten nut (2) to specified torque using a torque wrench.
Name
Size
Type
Lubricant
Value/Standard
Nut
Tightening torque
10 Nm ±2 Nm
11.
Replace further filter elements in the same way.
12.
Install diaphragm housing and lines.
198 | Crankcase Breather | MS15065/01E 2019-01
TIM-ID: 0000076689 - 002
