1306 – AL_PFM_solenoid_coils_defect
Cause
Corrective action
One of the two DCM control
channels (PO1 and/or PO2) of the
pre-feed module has detected an
electrical fault (overcurrent
monitoring).
1. Check component(s) and wiring, replace as necessary.
2. Contact Service.
1308 – AL_PFM_heater_cartridge_defect
Cause
Corrective action
The DCM control channel (PO3) of
the PFM has detected an
electrical fault (short circuit or
disruption fault).
1. Check component(s) and wiring, replace as necessary.
2. Contact Service.
1309 – AL_RA_line_feed_PFM_defect
Cause
Corrective action
Heating of RA line “PFM supply” is
faulty.
1. Check component(s) and wiring, replace as necessary.
2. Contact Service.
1310 – AL_RA_line_return_PFM_defect
Cause
Corrective action
Heating of RA line “PFM return” is
faulty.
1. Check component(s) and wiring, replace as necessary.
2. Contact Service.
1311 – AL_RA_ring_line_feed_SCR_F1_defect
Cause
Corrective action
Heating of RA line “Flow 1 loop
supply” is faulty.
1. Check component(s) and wiring, replace as necessary.
2. Contact Service.
1312 – AL_RA_ring_line_feed_SCR_F2_defect
Cause
Corrective action
Heating of RA line “Flow 2 loop
supply” is faulty.
1. Check component(s) and wiring, replace as necessary.
2. Contact Service.
1313 – AL_RA_ring_line_feed_SCR_F3_defect
Cause
Corrective action
Heating of RA line “Flow 3 loop
supply” is faulty.
1. Check component(s) and wiring, replace as necessary.
2. Contact Service.
1314 – AL_RA_ring_line_return_SCR_F1_defec
Cause
Corrective action
Heating of RA line “Flow 1 loop
return” is faulty.
1. Check component(s) and wiring, replace as necessary.
2. Contact Service.
162 | Troubleshooting | MS15065/01E 2019-01
TIM-ID: 0000078552 - 003
