9.8.2 Additional fuel filter – Replacement
Preconditions
☑
Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Filter wrench
F30379104
1
Engine oil
Easy-change filter
(→ Spare Parts Catalog)
2
WARNING
Fuels are combustible and explosive.
Risk of fire and explosion!
• Avoid open flames, electrical sparks and ignition sources.
• Do not smoke.
• Wear protective clothing, protective gloves, and safety glasses / facial protection.
WARNING
Liquid or gaseous media, e.g. fuel, are poisonous.
Escaping vapors of highly volatile media, e.g. fuel or ether.
Risk of fatal injury through swallowing; risk of poisoning through inhalation; irritation to eyes
and skin!
• Seek medical attention immediately; do not induce vomiting.
• Do not inhale vapors or smoke.
• Wear protective clothing, protective gloves, and safety glasses.
• If contact is made with skin, wash off with water and soap.
• Keep the engine room well ventilated at all times.
Replacing additional fuel filter
1.
Provide suitable container to collect escaping
fuel.
2.
Use filter wrench to remove easy-change fil-
ter (2).
3.
Clean sealing face on filter head (1).
4.
Coat gasket on easy-change filter (2) with
thin layer of engine oil (arrowed).
5.
Screw on easy-change filter (2) by hand until
the seal makes contact with the filter head
and tighten manually.
6.
Replace other easy-change filters in the same
way.
7.
Vent fuel system (→ Page 225).
MS15065/01E 2019-01
| Fuel Filter | 231
TIM-ID: 0000063488 - 003
