mru SWG 100 biogas, User Manual

Page: 66 / 141

MRU GmbH SWG 100 User Manual
Page 66 of 141
8.9. Administrator PIN code
All functions and menus which may disturb the analyzer's normal measurement can
be protected against unauthorized access by activating the administrator PIN code
request.
We highly recommend activating this function, when unauthorized persons could
access the analyzer.
The PIN code is: F1 - F1 - F3 - F2 - Up - Down
The PIN code request can be activated and deactivated in the menu Extras/General
settings:
The deactivation of the PIN code request requires at least one time PIN code input.
Once the user has inputted the correct administrator PIN code the analyzer will stay
in administrator mode (password free) for 10min after last time key press. Each key
acting will trigger another 10 minute password free operation.
8.10. Power-On of analyzer
When the analyzer is connected with mains power (Power-On) it will start the
system boot process which usually takes very few seconds. Then the display will
show the self-test menu.