mru SWG 100 biogas, User Manual

Page: 139 / 141

MRU GmbH SWG 100 User Manual
Page 139 of 141
The operator can change the dilution settings, from every measurement phase
for this measurement phase. Other measurement phases are not affected. For
example: If the SWG-100 has a sample gas junction, with three sample gas inlets
and the dilution-setting from sample gas-inlet 1 is permanently activated (ON), the
two other sample gas-inlets are further set to automatically.
To change the dilution setting follow steps must be done:
•
Open the path: E
XTRAS
/M
EASUREMENT CYCLE CONFIG
.
•
Open the measurement phase, from the sample-point, which should be set.
•
Press the OK key, to turn into the detail menu of the measurement phase.
•