mru SWG 100 biogas, User Manual

Page: 90 / 141

MRU GmbH SWG 100 User Manual
Page 90 of 141
Position 1: Acid-gas filter (#56795)
Required materials 2x Acid gas filter (#56795), contained in the service- set.
Required tools:
Needle-nose pliers.
Exchange interval:
Exchange necessary, if filter turns from purple to white.
Mounting direction: Irrelevant
Steps:
1.
Remove exhausted acid gas filter from
the clips.
2.
Pull the Viton tubes from the exhausted
acid gas filter. If it is necessary, use
needle- nose pliers.
3.
Plug the Viton tubes on the new acid
gas filters. Be sure, that the tubing is
correct. (The single tubes are signed with
+ - sketch on the right side.)
Steps:
Pull the Viton-tubes from the filter unit. If it is necessary, pliers can be used to solve
the tubes from the filter unit.
Remove the exhausted filter unit from the clip.
Plug the Viton tubes on the filter unit. Push the filter unit on the clip.
- Socket
+ Socket
Remove the
exhausted filter
unit.
Install a new filter
unit.