mru SWG 100 biogas, User Manual

Page: 11 / 141

MRU GmbH SWG 100 User Manual
Page 11 of 141
2. Analyzer Description
2.1. Intended use
The instrument is intended for analyzing the composition of biogases / landfill gases and
determine the concentration of several components like CH4, CO2, O2 and H2S. The instrument
may optionally be equipped to monitor several sites in time sharing technique (cyclical one by one
sampling).
In particular, the instrument is not foreseen to serve as a gas detector or safety device.
In case of unintended use, the warranty is void. Regular controls, inspections and the replacement
of polluted and exhausted filters by the operator are also an important part of proper use. See
chapter 10.1 regular maintenance work.
2.2. Type plate
The type plate of the analyzer contains important information about the analyzer. It can be found:
•
The serial-no.
•
The power supply.
•
The installed measurement options.
•
Date built.
The table below shows, which kind of measurement options may be installed in the analyzer.
1.
O2, H2S, H2,
CO
Electrochemical sensor
2. CH4/CO2 NDIR-bench
3.
H2
Thermal conductivity detector.
Table information: See below