mru SWG 100 biogas, User Manual

Page: 9 / 141

MRU GmbH SWG 100 User Manual
Page 9 of 141
Safety regulations
The analyzer may only be used as indicated in this manual. Our analyzers are
checked according to the following regulations:
VDE 0411 (EN61010)
and
DIN VDE 0701
before they leave the MRU GmbH factory.
MRU technical products are designed and manufactured according to DIN 31000/
VDE 1000 and UVV = VBG 4 of the professional guilds for fine mechanics and
electrical engineering.
MRU GmbH assures that the analyzer complies to the essential requirements of the
legal regulations of the member states of the electro-magnetic compatibility
(89/336/EWG) and to the low-voltage regulations (3/23/EWG).
Specific safety regulations
No part of the analyzer, or any other metal parts & accessories shall be used as
electric conductors.
The analyzer shall not be used in or under water.
The analyzer shall not be placed near or directly exposed to open fire or heat.
The analyzer shall avoid dropping.
WARNING
Acid substances
Moisture or condensate, being pumped out of the condensate outlet
port can be slightly acidic.
•
In case of skin contact IMMEDIATELY: clean affected parts of
the body.
•
Avoid getting liquid in eyes.
Please carefully clean all parts that come into contact with the
condensate.
1.6. Packing
Packing regulation of 12.07.1991
If your local waste facility does not accept MRU packing materials for disposal, you
may return it to MRU or our local sales representative. Packing materials returned to
MRU must be returned prepaid.
1.7. Return of hazardous waste
Waste Disposal/Returns/Warranty -
MRU GmbH is required to accept the return of hazardous waste such as electro-
chemical sensors that cannot be disposed of locally. Hazardous waste must be
returned to MRU prepaid.
1.8. Return of analyzer
MRU GmbH is required to accept the return, for proper disposal, of all analyzers
delivered after 13th of August 2005. Analyzers must be returned to MRU prepaid.
1.9. MRU Warranty conditions
The SWG100 BIOGAS warranty is 12 months.
1. The warranty on spare parts is 6 months.
2. The term of the warranty conditions starts as of the invoice date.
3. The warranty is void under the following conditions: