Trip and Fault Codes
128
6.2 Fail-Safe Codes
6.2.1 Main Board Trip Operation 2 (2402 – 2436)
A trip number in the range of 2402 to 2436 indicates that a process on the main board has been
affected in some way and is unable to recover automatically.
•
The trip is turned ON and OFF via the “Main Board Trip” (Advanced/Trips)
•
The default for this trip is ON
•
The trip MUST be reset using the either the digital input, touchscreen, or bus command
depending on the control method set.
•
As this is a special case, it is NOT possible to reset this trip by cycling the control supply.
Code #
Description
2402 Initialization process has been unsuccessful.
2404 Initialization of the Parameters has been unsuccessful.
2406 Initialization of the Overload has been unsuccessful.
2408 Initialization of the Parameter Read has been unsuccessful.
2410 Initialization of the Overload Read has been unsuccessful.
2412 Initialization of the Current Measurement has been unsuccessful.
2420 A main process on the Main Board has been affected and is unable to recover
automatically.
2422 A main process on the Main Board has been affected and is unable to recover
automatically.
2424 A main process on the Main Board has been affected and is unable to recover
automatically.
2426 Communication between the Main Board and Touchscreen Board has been
affected and is unable to recover automatically.
2428 The Modbus communication has been affected and is unable to recover
automatically.
2430 The parameter save has been unsuccessful.
2432 The logging function has been unsuccessful.
2434 A main process on the Main Board has been affected and is unable to recover
automatically.
2436 The Anybus communication has been affected and is unable to recover
automatically.
