Operation
33
5.5 Auto Reset Function
The Auto Reset feature automatically resets a selected number of faults and then attempts a start without
user intervention. The time between the resets and the number of reset attempts are both programmable. If
the Auto Reset has been successful, the Starter must operate trip free for a set time before the counters
are re-initialised. If the number of attempts exceeds the set value, the Auto Reset terminates, and the
counters will be re-initialised when a Reset or Stop signal is given by the
user.
The Auto-Reset function is accessible from the Advanced Menu (see Auto-Reset section of parameter
summaries):
WARNING:
When Auto Reset is enabled, a tripped motor may restart automatically
after the Reset Delay time. This may result in equipment damage or
personal injury if the function is used in an unsuitable application. Do not
use this function without considering applicable local, national, and
international standards, regulations, or industry guidelines.
Main Contactor Control On
BACK
Hand-Auto Control Off
Auto Reset
Advanced Settings
START
STATUS
>
>
