Appendices
141
Appendix 2
A2.0 Remote Installation of the Touchscreen
If required, the VMX-Synergy PlusTM touchscreen may be removed and located remotely – for
instance, on the enclosure door.
Procedure
1. Remove keypad from front of unit.
2. Remove short cable
3. Peel off backing on one side only
of the provided pressure sensitive
adhesive gasket. Attach the gasket
to the back of the keypad.
4. Peel off the backing from the
gasket attached to the keypad.
5. Place keypad on the outside of
door or panel with a 91mm (3.6") (91mm) by
112 mm (4.4") inch cutout.
6. Attach the long cable to the
keypad in place of the removed
short one.
7. Remove orientation label
after install is complete.
