Motorola VX-P949 User Manual Download

Page: 6 / 112

6.14.6 Selecting Location Format..................................................................................... 77

6.14.7 Saving a Waypoint................................................................................................. 78

6.14.8 Viewing a Saved Waypoint.................................................................................... 78

6.14.9 Editing the Alias of a Waypoint.............................................................................. 79

6.14.10 Editing the Coordinates of a Waypoint.................................................................79

6.14.11 Deleting a Single Saved Waypoint.......................................................................80

6.14.12 Deleting All Saved Waypoints..............................................................................81

6.14.13 Measuring the Distance and Bearing from a Saved Waypoint............................ 81

6.14.14 Location Feature in Emergency Mode................................................................. 81

6.15 Voice Announcement ..........................................................................................................82

6.16 Utilities................................................................................................................................. 82

6.16.1 Viewing Recent Calls............................................................................................. 82

6.16.2 Using the Flip Display............................................................................................ 83

6.16.3 Selecting a Basic Zone Bank................................................................................. 83

6.16.4 Selecting the Power Level..................................................................................... 83

6.16.5 Selecting a Radio Profile........................................................................................84

6.16.5.1 Selecting an Enhanced Zone Bank..........................................................84

6.16.6 Enabling and Disabling the Radio Alias................................................................. 85

6.16.7 Controlling the Display Backlight........................................................................... 85

6.16.8 Locking and Unlocking the Keypad and Controls.................................................. 85

6.16.9 Turning the Controls and Keypad Buttons Tones On or Off.................................. 85

6.16.10 Turning Voice Mute On or Off.............................................................................. 86

6.16.11 Using the Time-Out Timer....................................................................................86

6.16.12 Adjusting Squelch Level.......................................................................................87

6.16.13 Conventional Squelch Operation......................................................................... 87

6.16.13.1 Using Conventional Squelch Operation Features.................................. 88

6.16.14 Using the PL Defeat Feature............................................................................... 88

6.16.15 Digital PTT ID Support......................................................................................... 88

6.16.16 Smart PTT (Conventional Only)...........................................................................88

6.16.17 Transmit Inhibit.................................................................................................... 89

6.16.17.1 Enabling Transmit Inhibition...................................................................89

6.16.17.2 Disabling Transmit Inhibition.................................................................. 89

6.16.18 Instant Recall....................................................................................................... 90

6.16.18.1 Saving and Playback Calls.....................................................................90

6.16.19 General Radio Information...................................................................................91

6.16.19.1 Accessing the Radio Information........................................................... 91

6.16.19.2 Viewing the IP Information..................................................................... 92

6.16.19.3 Viewing the Control Assignments.......................................................... 93

6.16.20 Front Panel Programming....................................................................................93

MN003602A01-AF
Contents

Summary of Contents for VX-P949
















































































































Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands

Motorola VX-P949, User Manual

Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands