Motorola VX-P949 User Manual Download

Page: 61 / 112

6.9.2.1

Logging In as a User

Procedure:

Perform one of the following actions:

• Press the preprogrammed

User Login

button.

•

or to

User

and press the

Menu Select

button directly below

User

The display shows the User Login screen.

Perform one of the following actions:

•

[ID Entry]

and press the

Menu Select

button directly below

Edit

to enter

ID. A blinking cursor appears on the screen. Use the

keypad

to type or edit a user name.

Press the

Menu Select

button directly below

to submit.

•

to scroll through the list of predefined user names. Press the

Menu Select

button

directly below

Sel

to select the predefined user name.

• Press and hold

to scroll through the list of predefined user names at a fast scroll

rate. Press the

Menu Select

button directly below

Sel

to select the predefined user name.

If the ID is invalid, the display shows momentary

Invalid ID

Enter your Personal Identification Number (PIN) number.

Press the

Menu Select

button directly below

Logn

One of the following scenarios occurs:

• In ARS Server Mode, the display shows the User Login Indicator icon, the ID, and

progress

, with

Cncl

• In ARS Non-Server Mode, the display shows the User Login Indicator icon, the ID, and

Logged in

, with

Logt

and

Pscd

• In non-ARS enabled mode, the display shows

Offline

, with

Logt

and

Pscd

One of the following scenarios occurs:

• If the user name is invalid, login fails and the user login failure indicator (IP indicator) icon blinks.

The display also shows

• If the PIN is invalid, login fails and the user login failure indicator (IP indicator) icon blinks. The

display also shows

• Wait for the logged in confirmation screen. If the login process is successful, the display shows the

successful user login indicator (IP indicator) icon and

Logged in

, with

Logt

and

Pscd

6.9.2.2

Logging Out

Prerequisites:

When you have logged in or you are using Offline mode, you can log out.

When and where to use:

MN003602A01-AF

Advanced Features

Summary of Contents for VX-P949
















































































































Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands

Motorola VX-P949, User Manual

Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands