Motorola VX-P949 User Manual Download

Page: 10 / 112

Read Me First

This User Guide covers the basic operation of the radio. However, your dealer or system administrator
may have customized your radio for your specific needs. Check with your dealer or system
administrator for more information.

1.1

Notations Used in This Manual

Notations such as

Warning

Caution

, and

Notice

are used throughout the text in this publication.

These notations are used to emphasize that safety hazards exist, and the care that must be taken or
observed.

WARNING:

An operational procedure, practice, or condition and so on, which may result in

injury or death if not carefully observed.

CAUTION:

An operational procedure, practice, or condition and so on, which may result in

damage to the equipment if not carefully observed.

NOTICE:

An operational procedure, practice, or condition and so on, which is essential to

emphasize.

The following special notations identify certain items.

Example

Description

Home

button or

Buttons and keys are shown in bold print or as an icon.

Phon

Phone

Menu entries are shown similar to the way they appear on the dis-
play of the radio.

This means “Press the right side of the 4-Way Navigation Button”.

MN003602A01-AF
Read Me First

Summary of Contents for VX-P949
















































































































Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands

Motorola VX-P949, User Manual

Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands