Motorola VX-P949 User Manual Download

Page: 85 / 112

6.16.6

Enabling and Disabling the Radio Alias

When and where to use:

This feature allows you to display or hide the radio alias (name).

Procedure:

Press the

Menu Select

button directly below

MyID

The display shows momentary

Radio ID off

, and the radio alias disappears from the Home screen

or the display shows momentary

Radio ID on

, and the radio alias appears on the Home screen.

6.16.7

Controlling the Display Backlight

When and where to use:

You can enable or disable the radio display backlight as needed, if poor light

conditions make the display or keypad difficult to read.
Depending on how your radio is preprogrammed, you can also maintain a minimum backlight level on
the radio front display.

NOTICE:

The backlight setting also affects the

Menu Select

buttons, the

Navigation

button

and the

keypad

backlighting accordingly.

The backlight remains on for a preprogrammed time before it automatically turns off completely
or returns to the minimum backlight level.

Procedure:

Perform one of the following actions:

• To toggle the backlight on or off, press the preprogrammed

Light/Flip

button.

• To turn the backlight on, press any key of the

keypad

, the

Menu Select

Navigation

button, or any programmable radio controls or buttons.

6.16.8

Locking and Unlocking the Keypad and Controls

When and where to use:

You can lock your radio keypad, programmable buttons, and knob or knobs

to avoid inadvertent entry.Check with your dealer or qualified technician for best selection to suit your
usage.

Procedure:

Toggle the preprogrammed

Keypad/Control Lock

button to on.

The display shows

Kypd/Ctrl Lock

Toggle again to unlock the controls.

6.16.9

Turning the Controls and Keypad Buttons Tones On or Off

When and where to use:

You can enable and disable the tones of Navigation buttons, controls and

keypad if needed.

Procedure:

• Turning the tones on or off using the preprogrammed

Mute

button:

a. To turn the tones off or on, press the preprogrammed

Mute

button.

MN003602A01-AF

Advanced Features

Summary of Contents for VX-P949
















































































































Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands

Motorola VX-P949, User Manual

Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands