Motorola VX-P949 User Manual Download

Page: 4 / 112

6.2.5.1 Editing an Entry Alias................................................................................. 48

6.2.5.2 Editing as Entry ID..................................................................................... 48

6.2.5.3 Editing a Call Type..................................................................................... 49

6.2.6 Viewing Details of a Contact.................................................................................... 49

6.3 Scan Lists.............................................................................................................................. 49

6.3.1 Intelligent Priority Scan............................................................................................ 49

6.3.2 Viewing a Scan List..................................................................................................50

6.3.3 Editing the Scan List................................................................................................ 50

6.3.4 Changing the Scan List Status.................................................................................50

6.3.5 Viewing and Changing the Priority Status................................................................51

6.4 Scan.......................................................................................................................................51

6.4.1 Turning Scan On or Off............................................................................................51

6.4.2 Making a Dynamic Priority Change (Conventional Scan Only)................................52

6.4.3 Deleting a Nuisance Channel.................................................................................. 52

6.4.4 Restoring a Nuisance Channel................................................................................ 52

6.5 Call Alert Paging.................................................................................................................... 53

6.5.1 Receiving a Call Alert Page..................................................................................... 53

6.5.2 Sending a Call Alert Page........................................................................................53

6.6 Quick Call II .......................................................................................................................... 54

6.6.1 Initiating a Quick Call II Transmission......................................................................54

6.7 Emergency Operation............................................................................................................54

6.7.1 Special Considerations for Emergency Operation................................................... 55

6.7.2 Emergency Keep-Alive............................................................................................ 55

6.7.3 Exiting Emergency Operation.................................................................................. 55

6.7.4 Exiting Emergency as Supervisor (Trunking Only).................................................. 56

6.7.5 Sending an Emergency Alarm................................................................................. 56

6.7.6 Sending an Emergency Alarm with Emergency Call............................................... 57

6.7.7 Sending An Emergency Alarm and Call with Hot Mic.............................................. 57

6.7.8 Sending a Silent Emergency Alarm......................................................................... 58

6.8 Fireground............................................................................................................................. 58

6.8.1 Entering Fireground Zone Channel (Conventional)................................................. 58

6.8.2 Sending Evacuation Tone........................................................................................59

6.8.3 Responding to Evacuation Indicator........................................................................ 59

6.9 Automatic Registration Service..............................................................................................60

6.9.1 Selecting or Changing the ARS Mode..................................................................... 60

6.9.2 User Login Feature.................................................................................................. 60

6.9.2.1 Logging In as a User.................................................................................. 61

6.9.2.2 Logging Out................................................................................................61

6.10 Text Messaging Service...................................................................................................... 62

MN003602A01-AF
Contents

Summary of Contents for VX-P949
















































































































Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands

Motorola VX-P949, User Manual

Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands