Motorola VX-P949 User Manual Download

Page: 62 / 112

NOTICE:

Private data refers to all messages in the text messaging

Inbox

Draft

, and

Sent

folder. The next user is able to access the

Inbox

Draft

, and

Sent

messages if private data is

not deleted.

Procedure:

Press the

Menu Select

button directly below

Logt

One of the following scenarios will occur:

• The display shows

Clear private data?

. Proceed to the next step.

• If the Delete Messages On Session End feature is enabled, the radio clears the private data

and returns to

User Login

screen.

Perform one of the following actions:

• Select

Yes

to clear all your private data. The display shows

Private data cleared

• Select

to keep your private data.

6.10

Text Messaging Service

Text Messaging Service (TMS) allows you to send and receive messages and run database queries
directly from your radios. The maximum number of characters allowed for a text message is 200
characters.

The types of text messages available are:

• A new text message (free form message).

• A predefined message (quick text message).

• An edited quick text message.

• A query (Advanced Messaging Solution).

6.10.1

Accessing the Messaging Features

Procedure:

Perform one of the following actions:

• Press the preprogrammed

TMS Feature

button to access the TMS feature screen.

• Press and hold the preprogrammed

TMS Feature

button to access the Inbox.

• Follow the procedure described next to access this feature using the radio menu.

or to

TMS

Press the

Menu Select

button directly below

TMS

to access the TMS feature screen.

to scroll through the main menu options.

6.10.2

Composing and Sending a New Text Message

Procedure:

or to

TMS

MN003602A01-AF
Advanced Features

Summary of Contents for VX-P949
















































































































Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands

Motorola VX-P949, User Manual

Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands