Motorola VX-P949 User Manual Download

Page: 47 / 112

Select the

Menu Select

button directly below

Yes

to delete the entry, or

to cancel and return

to the main screen of Contacts.

The display shows

<Entry> deleted

and the radio returns to the main screen of Contacts.

6.2.3

Adding a Contact to a Call List

Procedure:

or to

Cnts

and press the

Menu Select

button directly below

Cnts

The entries are alphabetically sorted.

to the entry you want to add and press the

Menu Select

button directly below

Optn

Add to CallLst

and press the

Menu Select

button directly below

Sel

Perform one of the following actions:

•

to the required Call List and press the

Menu Select

button directly below

Add

add to the Call List.

•

Cncl

to cancel and return to the main screen of Contacts.

The display shows

Please wait

momentarily before showing

<Entry> added to Call

List

, confirming the addition of the contact to the list.

The radio returns to the main display of

Contacts

6.2.4

Removing a Contact from a Call List

Procedure:

or to

Cnts

and press the

Menu Select

button directly below

Cnts

The entries are alphabetically sorted.

to the entry you want to delete and press the

Menu Select

button directly below

Optn

Rm frm CallLst

and press the

Menu Select

button directly below

Sel

The display shows

Remove <Entry> frm Call List?

Press the

Menu Select

button directly below

Yes

to remove the entry from the Call List, or

cancel and return to the main display of

Contacts

The display shows

Please wait

momentarily before showing

<Entry> removed from

Call List

, confirming the removal of the contact from the list.

The radio returns to the main display of

Contacts

MN003602A01-AF

Advanced Features

Summary of Contents for VX-P949
















































































































Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands

Motorola VX-P949, User Manual

Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands