Motorola VX-P949 User Manual Download

Page: 92 / 112

• Flash Size and Type

• RF Band(s)

• Processor Version

• Option Board Serial Number (optional)

• Option Board Software Version (optional)

• Language Pack ID and Version (only when the language of the display is set to non-English)

• Codeplug Alias (Optional)

NOTICE:

To return to the Home screen, press

at any time.

Procedure:

Perform one of the following actions:

• Press the preprogrammed

Info

button.

•

or to

Info

and press the

Menu Select

button directly below

Info

Radio Info

and press the

Menu Select

button directly below

Sel

The display shows the Information screen.

Perform one of the following actions:

•

to scroll through the various information.

• To return to the previous screen, press the

Menu Select

button directly below

Back

• Press

to return to the Home screen .

6.16.19.2

Viewing the IP Information

When and where to use:

This feature displays the device name, IP address, and status of your radio.

NOTICE:

The device name of your radio is preprogrammed. Check with your dealer or system

administrator for more information.

Procedure:

Perform one of the following actions:

• Press the preprogrammed

Info

button.

•

or to

Info

and press the

Menu Select

button directly below

Info

IP Info

and press the

Menu Select

button directly below

Sel

The display shows the IP Info screen.

Perform one of the following actions:

•

to scroll through the various information.

• Press the

Menu Select

button directly below

Back

to return to the previous screen.

• Press

to return to the Home screen.

MN003602A01-AF
Advanced Features

Summary of Contents for VX-P949
















































































































Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands

Motorola VX-P949, User Manual

Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands