b. Press the
Menu Select
button directly below
Chan
.
c.
or
to the required channel or use the keypad to enter the channel number.
If the channel number entered is unprogrammed, the display shows
Invalid entry
.
Repeat this step.
d. Press the
Menu Select
button directly below
Sel
to confirm the selected channel.
• Select a channel using the radio menu
Channel Up
or
Channel Down
:
a.
or
to
ChUp
or
ChDn
.
b. Press the
Menu Select
button directly below
ChUp
or
ChDn
.
Positions of
ChUp
and
ChDn
on the display may differ each time you release the
Menu
Select
button. Read carefully before you press.
5.3
Selecting a Channel by using Channel Search Button
This feature allows you to do a quick search for a specific channel in your radio by keying in the alias of
the channel.
Procedure:
1
Perform one of the following actions:
• Press the preprogrammed
Channel Search
button.
•
or to
Srch
and press the
Menu Select
button directly below
Srch
.
A blinking cursor appears on the
Channel Search
screen.
2
Use the
keypad
to type or edit your channel name.
3
To initiate searching, press the
Menu Select
button directly below
Srch
once the entry is done.
To exit this procedure, press the
Back
button.
One of the following scenarios occurs:
• The display shows
Searching
. Once found, the display shows the matched channel name and the
radio changes its transmission to the selected channel.
• If the radio is triggered to search for an empty entry, the display shows
Invalid entry
. Repeat
• If the entry does not match, the display shows
Channel name not found
search again; or press
or the
Back
button to exit.
5.4
Mode Select Feature
Mode Select allows a long press to save the current zone and channel of your radio to a programmable
button, keypad button, or a softkey. Once programmed, the short-press of that button or softkey
changes the transmission to the saved zone and channel.
NOTICE:
Your radio must be preprogrammed for you to use this feature.
MN003602A01-AF
General Radio Operation
35
