Motorola VX-P949 User Manual Download

Page: 7 / 112

6.16.20.1 Entering the Front Panel Programming Mode........................................93

6.16.20.2 Editing FPP Mode Parameters...............................................................94

Accessories............................................................................................................... 95
Legal and Compliance Statement............................................................................96

Disclaimer.................................................................................................................................... 96

Copyrights....................................................................................................................................96

Declaration of Conformity............................................................................................................ 97

Important Safety Information....................................................................................................... 98

Notice to Users (FCC)................................................................................................................. 98

FCC Licensing Information............................................................................................... 98

Canada Licensing Information..................................................................................................... 99

Maritime Radio Use in the VHF Frequency Range...............................................100

Special Channel Assignments................................................................................................... 100

Emergency Channel....................................................................................................... 100

Non-Commercial Call Channel....................................................................................... 100

Operating Frequency Requirements..........................................................................................100

Declaration of Compliance for the Use of Distress and Safety Frequencies............................. 103

Technical Parameters for Interfacing External Data Sources....................................................103

Limited Warranty.....................................................................................................104

MOTOROLA SOLUTIONS COMMUNICATION PRODUCTS................................................... 104

I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:............................................... 104

II. GENERAL PROVISIONS:..................................................................................................... 105

III. STATE LAW RIGHTS:..........................................................................................................105

IV. HOW TO GET WARRANTY SERVICE:...............................................................................105

V. WHAT THIS WARRANTY DOES NOT COVER:.................................................................. 105

VI. PATENT AND SOFTWARE PROVISIONS:.........................................................................106

VII. GOVERNING LAW:.............................................................................................................107

VIII. For Australia Only...............................................................................................................107

Glossary...................................................................................................................108

MN003602A01-AF

Contents

Summary of Contents for VX-P949
















































































































Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands

Motorola VX-P949, User Manual

Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands