Motorola VX-P949 User Manual Download

Page: 94 / 112

Press

to select the required parameter to edit.

6.16.20.1.2

Non-Federal

Procedure:

Press or to

FPP

and press the

Menu Select

button directly below

FPP

The radio displays the

Enter password

screen

Enter the password and press the

Menu Select

button directly below

Press

to select

Zn/Ch

Press

to select the required zone.

Press

to select the required channel.

The display shows the radio parameter screen.

Press

to select the required parameter to edit.

6.16.20.2

Editing FPP Mode Parameters

Perform the following actions as required while navigating through the feature parameters.

• Press

to scroll through options or navigate vertically.

• Press the

Menu Select

button directly below

Edit

to edit the parameter values.

• Press the

Back

button to return to the previous screen.

MN003602A01-AF
Advanced Features

Summary of Contents for VX-P949
















































































































Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands

Motorola VX-P949, User Manual

Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands