Motorola BSR 2000, Configuration And Management Manual

Page: 162 / 650

BSR 2000 Configuration and Management Guide Release 1.0
4-32 MGBI 526360-001-00 Rev. B
Example
The following example shows how to create a context to be used to further restrict
access:
MOT
(config)# snmp-server context mycontext
Configuring Packet Size
1. Use the snmp-server packetsize command in Global Configuration mode to
change the permitted SNMP packet size that the SNMP Server can receive or
transmit:
MOT (config)#
snmp-server packetsize <
value
>
where:
value
is the permitted SNMP packet size, expressed in bytes; valid range is
484 to 17940; default is 1400.
2. Use the show snmp packetsize to view the currently configured packet size.
Monitoring SNMP
To monitor the status of SNMP operations on your network and check current SNMP
settings, you use a series of
show snmp commands. To issue show snmp commands,
do the following:
1. Enter the Privileged EXEC or Global Configuration mode.
2. Use the show snmp command to check the status of SNMP communications and
access counter information for SNMP operations. Use the show snmp command
with the
command-name
option to access specific SNMP information.
Table 4-3 lists the show snmp commands.
Table 4-3 show snmp Commands
Command Description
show snmp Provides counter information for SNMP operations.
It also displays the chassis ID string.
show snmp access Displays SNMP Access information.
show snmp community Displays SNMP community information.
show snmp contact Displays SNMP system contact information.