Motorola BSR 2000, Configuration And Management Manual

Page: 295 / 650

Release 1.0 Configuring the CMTS
526360-001-00 Rev. B MGBI 6-109
■
Use the max-burst command in Cable Service Class mode to control the
maximum traffic burst size at the transmission line rate of a service flows in a
service class:
MOT(config-srvclass)#
max-burst <
WORD
> <
1522-65535
>
where:
WORD
is the service class name.
1522-65535
is the maximum burst size at the transmission line rate of a
service flow in bytes or the value of the maximum concatenated burst size
QoS parameter.
■
Use the min-rate command in Cable Service Class mode to specify the
guaranteed or reserved traffic rate of a service flows in a service class:
MOT(config-srvclass)#
min-rate <
WORD
> <
0-4294967295
>
where:
WORD
is the service class name.
0-4294967295
is the guaranteed or reserved minimum number of bits per
second.
■
Use the min-pkt-size command in Cable Service Class mode to specify the
minimum packet size for a service flows in a service class with a reserved traffic
rate:
MOT(config-srvclass)#
min-pkt-size <
WORD
> <
64-1522
>
where:
WORD
is the service class name.
64-1522
is the assumed minimum packet size in bytes.
■
Use the max-concat-burst command in Service Class configuration mode to
specify the maximum size, in bytes, of a concatenated upstream burst from CMs:
MOT(config-srvclass)#
max-concat-burst <
WORD
> <
0-65535
>
Note: Packets sent on the service flow which are smaller than the assumed
minimum packet size are considered to be the assumed minimum packet
size.