Motorola BSR 2000, Configuration And Management Manual

Page: 100 / 650

BSR 2000 Configuration and Management Guide Release 1.0
3-50 MGBI 526360-001-00 Rev. B
Table 3-5 describes the show ssh config command output field descriptions:
Configuring
This section describes the Terminal Access Controller Access Control System Plus
(), a Cisco Systems proprietary version of TACACS. is an
access-control protocol that allows the BSR to provide security through a centralized
server. consists of three services: authentication, authorization, and
accounting (AAA). AAA is a software mechanism that provides a framework to
configure authentication, authorization, and accounting in a consistent manner.
Table 3-5 show ssh config Command Output Field Descriptions
Output Field Description
SSH2 Secure Shell The SSH version number.
sshTaskId The task identifier for this SSH session.
debugMode "0" indicates that SSH debugging is turned off - “1” indicates that
SSH debugging is turned on
quiet_mode “1” indicates that SSH debugging is turned off - "0" indicates that
SSH debugging is turned on
idle_timeout The inactivity timeout value (in seconds) for SSH sessions to
time out a specified with the
ssh timeout command.
portStr The defined TCP port number for SSH to listen for incoming
connections as specified with the
ssh port command.
max_connections The maximum number of allowed, simultaneous SSH sessions
specified with the
ssh session-limit command.
password_guesses The number of authentication attempts that will be allowed for an
SSH client attempting a connection as specified with the
ssh
password-guesses command.
macs The message authentication (data integrity) algorithm used for
SSH sessions as specified with the
ssh
message-authentication command.
ciphers The cipher for the encryption of SSH session data as specified
with the
ssh ciphers command.
subsystemString The type of SSH server.
Private HostKey file The private hostkey authentication filename
Public HostKey file The public hostkey authentication filename