Motorola BSR 2000, Configuration And Management Manual

Page: 91 / 650

Release 1.0 Configuring the System
526360-001-00 Rev. B MGBI 3-41
0-65535
is the optionally defined UDP port for the RADIUS authentication
server. The default port is 1812.
cr
is a command return that configures the RADIUS server host without a
UDP port designation.
3. Use the radius-server key command in Global Configuration mode to define the
shared encryption key that is exchanged between the RADIUS server and BSR
RADIUS client:
MOT(config)#
radius-server key <
WORD
>
where:
WORD
is the shared encryption key text.
Use the following options to change the default RADIUS server settings:
■
Use the radius-server retransmit command in Global Configuration mode to
specify the number of retry attempts to get a response from an active RADIUS
server:
MOT(config)#
radius-server retransmit <
0-100
>
where:
0-100
is the number of retransmissions. The default is 3 retransmissions.
■
Use the radius-server timeout command in Global Configuration mode to
configure the wait time interval for when there is no response from the server
before retransmitting to the RADIUS server:
MOT(config)#
radius-server timeout <
1-1000
>
where:
Note: It is recommended that the authentication key text string be more than
22 characters in length.
Caution: Ensure that the RADIUS server authentication key on the BSR is
the same as the RADIUS server authentication key on your RADIUS server.
If the keys are mismatched, communication does not occur between the BSR
and RADIUS server.