Motorola BSR 2000, Configuration And Management Manual

Page: 404 / 650

BSR 2000 Configuration and Management Guide Release 1.0
7-8 MGBI 526360-001-00 Rev. B
2. If the show packet-cable statistics gate command output for the Client-Open
Sent field in the COPS Statistics section is incrementing, the network and the
PDP server need to be examined to determine the reason for the COPS Client
timeouts. The COPS Client Timer (which is the response timer for sending the
COPS Client-Open message) can be specified if COPS connections timeout
before receiving a Client-Accept message.
3. Issue the cops client-timer command in PacketCable Configuration mode to
configure the amount of time permitted for the BSR to receive the Client-Accept
message from the PDP before terminating the COPS connection:
MOT(config-pktcable)#
cops client-timer <
1-3600000
>
where:
1-3600000
is the COPS Client timer value in milliseconds. The default is
3000.
Displaying COPS Connections
Issue the show packet-cable cops command in all modes except User EXEC mode
to display COPS connections, which includes the COPS Client handle, PDP IP
address, port number, keep-alive timeout, and duration time:
MOT#
show packet-cable cops [ inactive ]
where:
inactive optionally specifies displaying all inactive COPS Client handles.
Figure 7-1 displays typical show packet-cable cops command output:
Figure 7-1 Output for the show packet-cable cops Command.
MOT#show packet-cable cops
COPS Connection Information
----------------------------------------------------------------------------
| Handle | Type | IP Address | Port | Keep-Alive Timeout | Connected Time |
----------------------------------------------------------------------------
0 DQoS 172.50.1.100 52287 60 01:28:27
1 MM 150.31.1.143 46351 30 01:28:27
4 MM 150.31.1.140 59970 60 01:12:50