Motorola BSR 2000, Configuration And Management Manual

Page: 56 / 650

BSR 2000 Configuration and Management Guide Release 1.0
3-6 MGBI 526360-001-00 Rev. B
5. The show running-config command displays configuration information
currently running on the BSR. You have the option of displaying the entire
running configuration or displaying specific configuration information. Use the
show running-config command in Privileged EXEC mode to verify that the
changes you made were implemented:
MOT #
show running-config [ interface
[
cable <
X/Y
> | ethernet <
X/Y
> |
gigaether <
X/Y
> | loopback <
1-64
> ]] [ | { begin | exclude | include }
{<
WORD
>}]
where:
interface displays running configuration information on all interfaces or a
specific interface.
cable
X
= 0 and
Y
is the CMTS port number on the BSR.
ethernet
X
= 0 and
Y
is the Ethernet/Fast Ethernet IEEE 802.3 port number
on the BSR.
gigaether
X
= 0 and
Y
is the Gigabit Ethernet port number on the BSR.
loopback <
1-64
> is the loopback interface number.
| turns on output modifiers (filters).
begin filters for output that begins with the specified string.
exclude filters for output that excludes the specified string.
include filters for output that includes the specified string.
WORD
is the specified string.
The configuration parameters that you have set should appear in the show
running-config command output.
Specifying a Host Name
To optionally assign or change your BSR system network name, use the hostname
command in Global Configuration mode:
Note: The show running-config command output identifies the system
password with the number 0 if it is unencrypted. If the system password is
encrypted, it is identified with the number 7.