Motorola BSR 2000, Configuration And Management Manual

Page: 316 / 650

BSR 2000 Configuration and Management Guide Release 1.0
6-130 MGBI 526360-001-00 Rev. B
Figure 6-6 displays typical show cable qos profile command output for the class of
service (QoS) profile 1 which is configured in a CM configuration file:
Figure 6-6 Output for the show cable qos profile command.
Table 6-16 displays the show cable qos profile command output descriptions:
Notes About Viewing Class of Service (Qos) Profiles
When using the show cable qos profile command to view the class of service
configuration for DOCSIS 1.0 and Euro-DOCSIS 1.0 modems, you will obtain
inconsistent results under the following conditions.
■
When you have not given each class of service (QoS Profile) a unique classID (in
the range 1 through 16) in the CM configuration file.
Table 6-16 show cable qos profile Command Output Descriptions
Output Field Description
Serv Class The class of service ID number from 1 to 16.
Prio The QoS priority level.
Max upstream bandwidth The maximum assigned upstream bandwidth.
Guarantee upstream bandwidth The guaranteed minimum upstream bandwidth.
Max downstream bandwidth The maximum downstream bandwidth.
Max tx burst The maximum transmit burst size in bytes - valid range
is from 0 (the default) to the largest 16-bit integer.
Baseline Privacy "true" indicates that Baseline Privacy is enabled for this
QoS profile - "false" indicates that Baseline Privacy is
not enabled for this Qos profile.
Reference count Describes the number of CMs associated with the class
of service ID number.
Serv Prio Max Guarantee Max Max tx Baseline Reference
Class upstream upstream downstream burst Privacy count
bandwidth bandwidth bandwidth
1 5 0 64000 10000000 0 false 8