BSR 2000 Configuration and Management Guide
Release 1.0
7-20
MGBI
526360-001-00 Rev. B
displays typical
show ipsec spd policy
command output:
Figure 7-5 Output for the show ipsec spd policy Command.
Overriding SPD Configurations
Use the
spd override
command in IPSec Configuration mode to override IP
addresses, ports, or protocols that are configured in the IPSec Security Policy
Database (SPD).
MOT(config-ipsec)#
spd override
[
addr-selector
|
port-selector
|
protocol-selector
]
where:
addr-selector
sets the SPD to override a specific IP address within a range of IP
addresses set in the SPD or a wild card IP address set in the SPD.
port-selector
sets the SPD to override a specific port with a range of port(s) or
wild card set in the SPD.
protocol-selector
sets the SPD to override a specific protocol with a range of
protocol or wild card of protocol set in the SPD.
Note:
By default, no SPD override address selector is configured. However,
the SPD override port selector and SPD override protocol selector are
configured by default.
MOT#show ipsec spd policy
Index Source Address Destination Address SPort DPort
Processing Indicator IPsec Mode Proto Handle
1 150.31.40.10 150.31.50.10 0 0
Apply Transport Mode 0 3
2 150.31.50.10 150.31.40.10 0 0
Apply Transport Mode 0 4
3 0.0.0.0:0.0.0.0 0.0.0.0:0.0.0.0 0 0
ByPass 0 5
4 0.0.0.0-255.255.255.255 0.0.0.0-255.255.255.255 500 500
ByPass 17 1
5 0.0.0.0-255.255.255.255 0.0.0.0-255.255.255.255 0 0
Discard 0 2
Summary of Contents for BSR 2000
