Motorola BSR 2000 Configuration And Management Manual Download Page 140

Page: 140 / 650

BSR 2000 Configuration and Management Guide

Release 1.0

4-10

MGBI

526360-001-00 Rev. B

traps

indicates enable SNMP traps.

informs

indicates enable SNMP informs.

WORD

is the SNMPv1/v2c community string or SNMPv3 user name.

version

indicates the version of notifications. If no

version

keyword is

specified, the default is version 1.

is the SNMP version 1 message processing model.

is the SNMP version 2c message processing model.

3 auth

is the SNMP version 3 message processing model with authentication

and uses unscrambled packets.

3 noauth

is the SNMP version 3 message processing model with no

authentication and uses unscrambled packets.

3 priv

is the SNMP version 3 message processing model that authenticates

and scrambles packets.

Use the

no snmp-server host

command to remove the specified host.

Specifying Specific Trap Types

Use the

snmp-server host traps

command in Global Configuration mode to

configure an SNMP trap host to receive specific trap types as shown below. If no trap
type is specified, all traps are sent to this trap host.

MOT

(config)#

snmp-server host

A.B.C.D

traps

WORD

[

udp-port

0-65535

] [

bgp

docsdevcmts

entity

environ

flap | ospf

pim

snmp

]

where:

Note:

If the

community-string

is not defined using

snmp-server community

command prior to using the

snmp-server host

command, the default form of

the

snmp-server community

command is automatically inserted into the

configuration. The password (

community-string

) used for this default

configuration is the same as that specified in the

snmp-server host

command.

When removing an SNMP trap host from the trap host list with the

snmp-server host

command, the community name that is specified in the

command must exist. If the community name does not exist, the command
will fail.

Summary of Contents for BSR 2000











































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BSR 2000

Reviews:

Related manuals for BSR 2000

Brands by name

Popular brands

Motorola BSR 2000, Configuration And Management Manual

Search results

Summary of Contents for BSR 2000

Reviews:

Related manuals for BSR 2000

Brands by name

Popular brands