Motorola BSR 2000, Configuration And Management Manual

Page: 434 / 650

BSR 2000 Configuration and Management Guide Release 1.0
7-38 MGBI 526360-001-00 Rev. B
Enabling the COPS Status SNMP Trap
Issue the cops status-trap enable command in PacketCable Configuration mode to
optionally enable the COPS status SNMP trap through the
DQoSCopsTrap
SNMP
MIB object.
MOT(config-pktcable)#
cops status-trap-enable [ enable | disable ]
where:
enable enables COPS status SNMP trap. The default is disabled.
disable disables COPS status SNMP trap.
If the COPS status SNMP trap is enabled, the BSR generates an SNMP trap when one
or more of the following conditions occur:
■
a keep alive timeout
■
the COPS connection is disconnected
■
a failure to establish a TCP connection
■
a COPS connection is established
■
an unauthorized PDP attempt to establish a COPS connection
Enabling the Emergency Call SNMP Trap
Issue the dqos emergency-trap command in PacketCable Configuration mode to
optionally enable an SNMP trap for Emergency Calls through the
rdnPktDQoSEmergencyTrapEnable
SNMP MIB object:
MOT(config-pktcable)#
dqos emergency-trap-enable [ enable | disable ]
where:
enable enables Emergency Call SNMP trap. The default is disabled.
disable disables Emergency Call SNMP trap.
If the Emergency Call SNMP trap is enabled, the BSR generates an SNMP trap if an
Emergency Call is initiated.