Mitsubishi FB13PNT, Quick Start Manual

Page: 36 / 292

1-23 1-23
CHAPTER 1 CONTROLLER CHAPTER 1 CONTROLLER
#3 Top Lift Speed #3 Top Lift Speed
This setting This setting affects pum affects pump speed and p speed and FC solenoid FC solenoid current w current when you pull t hen you pull the lift leve he lift lever. If you r. If you set a smalle set a smaller value than r value than #2, then the #2, then the
#2 setting will be #2 setting will be ignored. ignored.
FC spec: speed when the lift lever is pulled. FC spec: speed when the lift lever is pulled.
MC spec: speed when lift switch 2 is turned on.
MC spec: speed when lift switch 2 is turned on.
Lifting speed will become faster if the value
Lifting speed will become faster if the value setting is increased. setting is increased.
The setting r The setting range is 1 to 10. ange is 1 to 10.
500935 500935
Pump motor Pump motor
output [%] output [%]
Lever angle [%] Lever angle [%]
100 100
0 0 100 100
SUO #2 SUO #2
(start lift speed) (start lift speed)
SUO #3 SUO #3
(top lift speed) (top lift speed)
10 10
8 8
1 1
Pump motor Pump motor
output [%] output [%]
Lever operation Lever operation
100 100
0 0 SW1 SW1
Close Close
SUO #3 SUO #3
SUO #2 SUO #2
10 10
9 9
8 8
SW2 SW2
Close Close
Pump motor output characteristics (lift-up operation) Pump motor output characteristics (lift-up operation)
F F C C M M C C
#4 Tilt Speed #4 Tilt Speed
This setting affects pump spee This setting affects pump speed and FC solenoid curre d and FC solenoid current when you operate th nt when you operate the tilt lever or tilt switch. e tilt lever or tilt switch. Tilt speed will be faster Tilt speed will be faster
if the value setting is increase if the value setting is increased. d. The setting range is 1 to 10. The setting range is 1 to 10.
Tilt speed has pr Tilt speed has priority over lifting iority over lifting speed, when t speed, when the two lever he two levers are operate s are operated simultaneously. d simultaneously.
500936 500936
Pump motor output Pump motor output characteristics (tilt operation) characteristics (tilt operation)
F F C C M M C C
Pump motor Pump motor
output [%] output [%]
Lever angle [%] Lever angle [%]
0 0
100 100
10 10
SUO #4 (Tilt) SUO #4 (Tilt)
6 6
1 1
2 2
100 100
Pump motor Pump motor
output [%] output [%]
Lever operation Lever operation
100 100
0 0
SW Close SW Close
SUO #4 SUO #4
10 10
2 2
1 1