Mitsubishi FB13PNT, Quick Start Manual

Page: 174 / 292

2-87 2-87
501151 501151
- - 23 23
2 2 1 1 1 1 9 9 1 1 7 1 7 1 5 5 - - - - 9 9 7 7
5 5 3 3 1 1
- - 24 24
- - 2 2 0 0 1 1 8 - 8 - - - - - - - 8 8
6 6 4 4 2 2
CHAPTER 2 TROUBLESHOOTING FOR CONTROL CIRCUITS CHAPTER 2 TROUBLESHOOTING FOR CONTROL CIRCUITS
3.3 3.38 8 Log Logic C ic Card ard Ini Initia tializ lize F e Fail ailure ure (61 (61))
Error code: 61 Error code: 61
Sit Situat uation ion Dis Displa play: "6 y: "61". 1". All t All truc ruck ope k operat ration ions inh s inhibi ibited ted. Lin . Line co e conta ntacto ctor OP r OPEN an EN and ST c d ST cont ontact actor O or OPEN PEN..
Possible Possible
cause cause
Setup Option Group 3 data not set, Setup Option Group 1 and Setup Option Group 3 data not set, Setup Option Group 1 and 2 default data not set, faulty 2 default data not set, faulty Setup Option data, Setup Option data,
faulty logic unit. faulty logic unit.
Trigger of Trigger of
the error the error
code
code
Setup Option data is in Setup Option data is in abnormal setting range. MC specification is set at #43 abnormal setting range. MC specification is set at #43 while CAN data is while CAN data is received from received from
input unit or output unit. input unit or output unit.
Checks Checks
(1) Turn off power, then turn on power in Setup Option Group (1) Turn off power, then turn on power in Setup Option Group 3 setting 3 setting
(2) Set Setup Option Group 3 data (2) Set Setup Option Group 3 data
Confirm t Confirm t hat SUO hat SUO #43 and 50 have been set up correctly and thei #43 and 50 have been set up correctly and thei r combinatio r combinatio n n
with output unit with output unit and input unit is and input unit is cor cor rect rect
(3) S (3) S et Setup Option default et Setup Option default data data
(4) Turn on power (4) Turn on power
(5) With service tool, set Setup Option Group 3 data (5) With service tool, set Setup Option Group 3 data
(9) With service tool, set Setup Option Group 3 data (9) With service tool, set Setup Option Group 3 data
(6) With service tool, set Setup Option default data (6) With service tool, set Setup Option default data
(7) Disconnect battery plug (7) Disconnect battery plug
(8) Replace logic card of logic unit (8) Replace logic card of logic unit
(10) With service tool, set Setup Option default data (10) With service tool, set Setup Option default data
If fault remains If fault remains
If fault remains If fault remains
Input Input
output output
o o u u t t p p u u t t - -
Input Input
output output
Tilt horizon Function Tilt horizon Function
Enable Disable Enable Disable
FC FC
MC MC