Mitsubishi A953GOT-LBD-M3-H, Hardware Manual

Page: 135 / 142

A-1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
Appendix A:
A-1: System Configuration Example in Microcomputer Connection
A system configuration example in microcomputer connection is shown below.
Refer to it in constructing a system in microcomputer connection.
A-1-1: System configuration
The figure below shows a system example using the A975GOT adopted in this system
configuration.
For connection of the Handy GOT, refer to chapter 12.
A-1-2: Communication setting in GOT and contents of setting on monitor screen
1) Communication setting
The table below shows the communication setting in the GOT.
The communication setting in microcomputer connection can be executed using the utility
function ("Setup").
2) Contents of setting on monitor screen
The contents of setting on the monitor screen are described below.
a) Common setting
Screen changeover device (base screen): D20
Setting item Contents of setting
Transmission speed in microcomputer connection 19200 bps
Protocol in microcomputer connection Format 1
A A9GT-RS2
DOS/V personal computer
(Microsoft Visual C++ version5.0)
AC30R2-9SS
A953 HANDY GOT