Mitsubishi A953GOT-LBD-M3-H, Hardware Manual

Page: 38 / 142

A953 HANDY GOT Installation Wiring 2
2-10
2.2.5 Wiring of power supply
To the Handy GOT, the power is supplied from the PLC or an external power supply unit.
The current consumption of the Handy GOT is 400mA/24V DC.
Example when the power is supplied from an external power supply
Connect a 24V DC external power supply unit to the power supply line (pin) of the external
cable (untied or with a connector) of the Handy GOT.
Pin arrangement
Signal name
External cable
F9GT-HCAB-3M F9GT-HCAB1-3M
24+ 24,25 Blue/white, gray/white
24G 12,13 Purple, pink
FG 1 Drain wire
E x t e r n a l
p o w e r
s u p p l y u n i t
P L C
C l a s s D g r o u n d i n g
H a n d y
G O T
F G
P L C
1 0 0 V A C
2 0 0 V A C
E x t e r n a l
p o w e r
s u p p l y u n i t
C l a s s D g r o u n d i n g
H a n d y
G O T
F G
a) When the input power is equivalent
When the input power for the PLC is equivalent to
the input power for the external power supply (24V
DC), perform grounding by connecting the frame
ground wire of the Handy GOT to the ground
terminal (
) of the PLC.
b) When the input power is different
When the input power is different between the PLC
and the external power supply unit (PLC: 200V
AC, external power supply: 100V AC), perform
dedicated grounding to eac h of the ground
terminal (
) of the PLC and the frame ground
wire of the Handy GOT.
*1 Cautions on Class D grounding according to the input power
P L C
T o o p e r a t i o n s w i t c h e s o f h a n d y G O T
H a n d y G O T
C l a s s D
g r o u n d i n g
C l a s s D
g r o u n d i n g
E x t e r n a l p o w e r
s u p p l y u n i t
F G
2 4 + C O M X 4
X 0
X 1 X 2 X 3
2 4 + 2 4 G
* 1