Mitsubishi A953GOT-LBD-M3-H, Hardware Manual

Page: 51 / 142

A953 HANDY GOT Wiring and Handling of Switches 3
3-9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
3.4 Setting of grip switch
The grip switch is provided on the side of the Handy GOT. While the grip switch (a-contact) is
pressed and held, manipulation of the touch switches on the screen is effective.
The ON/OFF status of the grip switch can be monitored in the PLC.
3.4.1 Effectiveness/ineffectiveness of grip switch
In order to set the grip switch effective or ineffective, use the utility function in the Handy GOT.
(In the default, the grip switch is effective.)
When the grip switch is set effective, the OFF operation of the touch switches can be changed
by the grip switch by setting "If it is released" described in the next chapter. (For the details,
refer to the next chapter.)
1) Setting in the Handy GOT
Set the grip switch effective or ineffective in "Setup" of the utility function of the Handy GOT.
1st page 2nd page
2) Setting in the screen creation software (SW
†
D5C-GOTR-PACKE)
Setting is not available. (Only the Handy GOT is available for the setting.)
Grip switch