Mitsubishi A953GOT-LBD-M3-H, Hardware Manual

Page: 34 / 142

A953 HANDY GOT Installation Wiring 2
2-6
2.2.2 Cable selection
The figure below shows the outline of connection to the PLC.
Note:
The connection distance between the handy graphic operation terminal and the PLC ("1) +
3)" or "2)") should be within 6m (19' 8").
Name Model name Remarks
1)
External cable
(with 25-pin D-Sub connector on one side)
F9GT-HCAB-3M(3m, 9' 10")
2)
External cable
(with untied 20-core wires on one side)
F9GT-HCAB1-3M(3m, 9' 10")
3)
Relay cable for PLC connection
(with 6-pin MINI DIN connector on PLC side)
F9GT-HCAB5-150(1.5m, 4' 11")
For Q Series
Cable for any other
series is to be
prepared by user.
Connect a cable to
the connector inside
the rear cover.
1) 3)
To Q Series PLC
2)
For the details, refer to section 2.2.4.
For the details, refer to
section 2.2.3.
For the details, refer to
section 2.2.3.
To the power supply and
operation switches
To power supply
To operation switches
To PLC
P O W
E R
G R I P
S W