Mitsubishi A953GOT-LBD-M3-H, Hardware Manual

Page: 116 / 142

A953 HANDY GOT Connection to Microcomputer 12
12-2
12.2 Transmission specifications
The table below shows the transmission specifications for communication between the GOT
and the host.
12.3 Connection cable
12.3.1 When DTR is used
1) Connection diagram
Note: Write the "Pin number" column on the host side in accordance with the specifications
of the connected host.
2) Used connectors and connector covers
- Connector on the side of the cable dedicated to the GOT
The connector of the cable dedicated to the GOT (F9GT-HCAB-
††
M) has the following
model name. Use a counterpart connector compatible with this connector.
17JE-23250-02 (D8A2)
25-pin D-Sub, male connector manufactured by DDK Ltd. (DDK)
The cable dedicated to the GOT (F9GT-HCAB1-
††
M) is the untied wire type.
- Port on the host side
Use a connector compatible with the used host.
Item Contents of setting
Data bit 7 bits
Parity bit Provided (even)
Stop bit 1 bit
Sum check Provided
Transmission speed 4,800, 9,600 or 19,200 bps (default: 19,200 bps)
GOT side (F9GT-HCAB
†
-3M)
(
†
= none or 1)
Cable connection and signal direction
Host
Signal
name
Untied
wire color
Pin
number
Pin
number
Signal
name
CD(DCD) Blue 8 FG
RD(RXD) Red 4 SD(TXD)
SD(TXD) Black 2 RD(RXD)
ER(DTR) White 3 RS(RTS)
SG(GND) Orange 10 CS(CTS)
DR(DSR) Green 5 5V
RS(RTS) Yellow 6 DR(DSR)
CS(CTS) Brown 7 ER(DTR)
FG
(SHIELD)
Drain wire 1 SG(GND)
Class D grounding