Mitsubishi A953GOT-LBD-M3-H, Hardware Manual

Page: 102 / 142

A953 HANDY GOT Connection to PLC by Yaskawa Electric 9
9-4
c) When the CP-9300MS is used
d) When the PROGIC-8 is used (when the 15-pin D-Sub port is used)
2) Used connectors and connector covers
- Connector on the side of the cable dedicated to the GOT
The connector of the cable dedicated to the GOT (F9GT-HCAB-
††
M) has the following
model name. Use a counterpart connector compatible with this connector.
17JE-23250-02 (D8A2)
25-pin D-Sub, male connector manufactured by DDK Ltd. (DDK)
The cable dedicated to the GOT (F9GT-HCAB1-
††
M) is the untied wire type.
- Port on the side of the PLC by Yaskawa Electric
Use a connector compatible with the PLC by Yaskawa Electric.
GOT side
(F9GT-HCAB
†
-3M)
(
†
= none or 1)
Cable connection and signal direction
Yaskawa Electric PLC
side
(9-pin D-Sub, male,
milli-thread type)
Signal
name
Untied
wire
color
Pin
number
Pin
number
Signal
name
CN2 CN3
CD(DCD) Blue 8 1 FG Not used
RD(RXD) Red 4 2 TXD
SD(TXD) Black 2 3 RXD
ER(DTR) White 3 4 RTS
SG(GND) Orange 10 5 OP CTS
DR(DSR) Green 5 6 DSR Not used
RS(RTS) Yellow 6 7 GND
CS(CTS) Brown 7 8 PWR Not used
FG
(SHIELD)
Drain
wire
1 9 DTR Not used
GOT side
(F9GT-HCAB
†
-3M)
(
†
= none or 1)
Cable connection and signal direction
Yaskawa Electric PLC
side
(15-pin D-Sub, male,
milli-thread type)
Signal
name
Untied
wire
color
Pin
number
Pin
number
Signal
name
CD(DCD) Blue 1 1 FG
RD(RXD) Red 4 2 TXD
SD(TXD) Black 2 3 RXD
ER(DTR) White 3 4 RTS
SG(GND) Orange 10 5 CTS
DR(DSR) Green 5 6 DSR
RS(RTS) Yellow 6 7 GND
CS(CTS) Brown 7 8 NC
FG
(SHIELD)
Drain
wire
1 9 DTR
Class D grounding
Class D grounding