Mitsubishi A953GOT-LBD-M3-H, Hardware Manual

Page: 25 / 142

A953 HANDY GOT Introduction 1
1-5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
1.4 Part identification
This section roughly explains the name and function of each part of the Handy GOT.
1.4.1 Front panel
The name and function of each part of the front panel of the Handy GOT are described below.
1) POWER LED
Lit while 24V DC power is supplied to the Handy GOT.
2) LC display unit with touch switches
Offers 8 colors in the A953GOT-SBD-M3-H or 2 colors (black and white) in the A953GOT-
LBD-M3-H.
This display unit offers the functions equivalent to those offered by the display unit of the
graphic operation terminal A950GOT.
Display size: 320
×
240 dots
Effective display size: 115(4.53") W
×
86(3.39") H mm
3) Operation switches (Refer to section 3.2.)
Directly connected to inputs of the PLC.
Each of these four switches is equipped with a green LED which indicates the pressing
status. The information on the green LED lighting command is transferred between the PLC
through serial communication.
The operator can arbitrarily set the display control using a PLC program.
The operator can arbitrarily change the name of these four switches using sheets offered as
accessories. (Refer to section 3.5.)
4) Emergency stop switch (Refer to section 3.3.)
Is a switch with independent contact of 24V DC specification.
5) Grip switch LED (Refer to section 3.4.)
Lit while the grip switch provided on the side is pressed and held.
6) Operation switch name sheet insertion slot (Refer to section 3.5.)
Can be seen when the operation switch cover is removed from the lower portion of the
Handy GOT.
P O W E R G R I P S W
1 )
2 )
3 )
4 )
5 )
P O W E R G R I P S W
W h e n t h e o p e r a t i o n s w i t c h c o v e r i s r e m o v e d
O p e r a t i o n s w i t c h c o v e r
6 )