Mitsubishi A953GOT-LBD-M3-H, Hardware Manual

Page: 106 / 142

A953 HANDY GOT Connection to PLC by Allen-Bradley 10
10-2
10.3 Transmission specifications
The table below shows the transmission specifications for communication between the GOT
and the PLC by Allen-Bradley.
10.4 Connection cable
1) Connection diagram
2) Used connectors and connector covers
- Connector on the side of the cable dedicated to the GOT
The connector of the cable dedicated to the GOT (F9GT-HCAB-
††
M) has the following
model name. Use a counterpart connector compatible with this connector.
17JE-23250-02 (D8A2)
25-pin D-Sub, male connector manufactured by DDK Ltd. (DDK)
The cable dedicated to the GOT (F9GT-HCAB1-
††
M) is the untied wire type.
- Port on the side of the PLC by Allen-Bradley
Use a connector compatible with the PLC by Allen-Bradley.
Item Contents of setting
Transmission speed 19200 bps
Data length 8 bits
Stop bit 1 bit
Parity bit EVEN
Control method Not provided
GOT side (F9GT-HCAB
†
-3M)
(
†
= none or 1)
Cable connection and signal direction
Allen-Bradley PLC
side (9-pin D-Sub,
female, inch-thread
type)
Signal
name
Untied
wire color
Pin
number
Pin
number
Signal
name
CD(DCD) Blue 8 1 CD(DCD)
RD(RXD) Red 4 2 RD(RXD)
SD(TXD) Black 2 3 SD(TXD)
ER(DTR) White 3 4 ER(DTR)
SG(GND) Orange 10 5 SG(GND)
DR(DSR) Green 5 6 DR(DSR)
RS(RTS) Yellow 6 7 RS(RTS)
CS(CTS) Brown 7 8 CS(CTS)
FG
(SHIELD)
Drain wire 1 9 FG
−
Shell
Class D grounding