Mitsubishi MOTORS Outlander PHEV 2018, Owner'S Manual

Page: 377 / 457

Jack and tools
8-6 For emergencies
8
8. If the coolant reserver tank needs coolant,
you will probably also need to add coolant
to the radiator. Do not loosen or remove
the radiator cap (D) and the reserver cap
(E) until the Plug-in Hybrid EV system
has cooled down.
9. Start the Plug-in Hybrid EV system, and
slowly add coolant, up to the bottom of
the filler neck. Use plain water if you
have to (and replace it with the right cool-
ant as soon as possible).
10. Replace the radiator cap and tighten it
fully. You can start driving again when the
high coolant temperature warning does
not come on.
11. Have the system inspected by your certi-
fied Mitsubishi EV dealer.
N00836601406
The tools are stowed back of the interior trim
lid in the cargo area.
The jack is stowed in the luggage floor box.
WARNING
 Removing the radiator cap and the
reserve cap could scald you with escaping
hot water or steam. When checking the
radiator level, cover the cap with a cloth
before trying to remove it. Turn it slowly
counterclockwise, without pressing down,
to the first notch. The pressure in the sys-
tem will then be let out. When the pres-
sure is COMPLETELY LET OUT, press
down and keep turning the cap counter-
clockwise until it comes off.
Jack and tools
Storage
1- Tools
BK0254400US.book 6 ページ ２０１７年８月１０日 木曜日 午後１時５０分