Mitsubishi MOTORS Outlander PHEV 2018, Owner'S Manual

Page: 268 / 457

Multi-information display
Features and controls 5-147
5
N00557401185
You can turn off the operation sounds of the
multi-information display switch and rheostat
illumination button.
1. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
or more) to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings”
on page 5-143.
2. Lightly press the multi-information dis-
play switch to select “ ” (operation
sound setting).
3. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
or more) to switch from ON (operation
sound on) to OFF (operation sound off),
or from OFF to ON.
The setting is changed to the selected con-
dition.
N00557501199
The time until the display appears can be
changed.
1. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
or more) to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings”
on page 5-143.
2. Lightly press the multi-information dis-
play switch to select “ALARM” (rest time
setting).
3. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
or more) to display “ALARM” (rest time
setting).
4. Lightly press the multi-information dis-
play switch to select the time until the dis-
play appears.
5. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
or more) to change the setting to the
selected time.
N00563501110
It is possible to change the turn signal sound.
• When “A or 1” (language cooperation:
enabled) has been selected, the language for
Multi Around Monitor (if so equipped) is
automatically changed to the language
selected for the multi-information display.
However, this changing function may not
work depending on the language selected
for the multi-information display.
• When “M, 2 or P” (language cooperation:
disabled) has been selected, the language
for Multi Around Monitor (if so equipped)
is not automatically changed to match the
language selected for the multi-informa-
tion display.
 The language on the audio system’s display
does not automatically change when you
select A or 1 (language cooperation:
enabled) in the language cooperation control.
Operation sound setting
NOTE
NOTE
 If the 12 V starter battery is disconnected,
the memory of the operation sound setting is
erased and is automatically set to “ON”
(operation sound on).

The operation sound setting only deactivates
the operation sound of the multi-information
display switch and rheostat illumination but-
ton. The warning display and other sounds
cannot be deactivated.
Changing the time until “REST
REMINDER” is displayed
NOTE
 If the 12 V starter battery is disconnected,
the memory of the unit setting is erased and
is automatically set to the “OFF”.
 The drive time is reset when the operation
mode is in OFF.
Changing the turn signal sound
BK0254400US.book 147 ページ ２０１７年８月１０日 木曜日 午後１時５０分