Mitsubishi MOTORS Outlander PHEV 2018, Owner'S Manual

Page: 319 / 457

120 V AC power supplies (if so equipped)
5-198 Features and controls
5
1. Press the 120 V AC power supply switch.
The indicator light (A) will come on and
power supply system is ready for use.
To cancel power supply, press the switch
again and the indicator light will go off.
2. Open the lid (B).
3. Insert the plug in the power outlet firmly.
Make sure the plug is connected correctly.
4. Disconnect the plug and close the lid after
using the electrical appliance.
Back of floor console box
Right side of cargo area
To use
WARNING
 Never use the 120 V AC power supply to
charge an electric vehicle or a plug-in
hybrid vehicle. Also, never connect the
120 V AC power supply to a household
powerline or a distribution panel. This
may lead to electric shock or a malfunc-
tion.
 Do not connect or disconnect the plug with
a wet hand. Doing so can cause an electric
shock.

Never pull the cable to remove the plug.
Pull straight with holding the plug of an
electrical appliance.
 Do not disassemble or modify the 120 V
AC power supply.
BK0254400US.book 198 ページ ２０１７年８月１０日 木曜日 午後１時５０分