Mitsubishi MOTORS Outlander PHEV 2018, Owner'S Manual

Page: 361 / 457

Dual-zone automatic climate control air conditioner
7-6 Comfort controls
7
N00736901235
Press of the blower speed selection
switch to increase the blower speed.
Press
of the blower speed selection
switch to decrease the blower speed.
The selected blower speed (A) will be shown
in the display.
N00737001477
Press or of the temperature control
switch to the desired temperature.
The selected temperature (A) will be shown
in the display.
NOTE
 While EV priority mode is activated, except
in pressing the defogger switch, engine does
not start.
Therefore, the heating performance may not
be sufficiently obtained while EV priority
mode is activated. In such case, cancel EV
priority mode. Refer to “EV switch” on page
5-62.
 Since the air conditioning operation is con-
trolled while the ECO mode is operating,
you may feel that effectiveness of the air
conditioner is insufficient. Refer to “ECO
mode switch” on page 5-186.

Even during ECO mode operation, you can
select normal operation of the air condi-
tioner.
On vehicles equipped with the Smartphone
Link Display Audio, screen operations can
be used to change the setting. Refer to the
separate owner’s manual for details.
 In extreme cold, the air conditioning control
panel screen may operate sluggishly. This
does not indicate a problem.
It will disappear when the vehicle interior
temperature rises to a normal temperature.
Blower speed selection switch
1- Increase
2- Decrease
Temperature control switch
NOTE
 The temperature value of air conditioner is
switched in conjunction with outside temper-
ature display unit of the multi-information
display.
Refer to “Changing the temperature unit” on
page 5-145.
BK0254400US.book 6 ページ ２０１７年８月１０日 木曜日 午後１時５０分