Mitsubishi MOTORS Outlander PHEV 2018, Owner'S Manual

Page: 264 / 457

Multi-information display
Features and controls 5-143
5
N00556801296
1. Park your vehicle in a safe place.
Firmly apply the parking brake and press
the electrical parking switch and shift to
the “P” (PARK) position.
2. When you lightly press the multi-informa-
tion meter switch, the information screen
switches to the function setting screen.
Refer to “Information screen” on page
5-135.
3. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
or more) to switch from the setting mode
screen to the menu screen.
4. Select the item to change on the menu
screen and change to the desired setting.
For further details on the operation meth-
ods, refer to the following sections.
Refer to “Changing the reset mode for
average fuel consumption” on page 5-144.
Refer to “Changing the fuel consumption
display unit” on page 5-144.
Refer to “Changing the temperature unit”
on page 5-145.
Refer to “Changing the display language”
on page 5-146.
Refer to “Changing the language on other
system to match the multi-information
display” on page 5-146.
Refer to “Operation sound setting” on
page 5-147.
Refer to “Changing the time until “REST
REMINDER” is displayed” on page
5-147.
Refer to “Changing the turn signal sound”
on page 5-147.
Refer to “Tire ID set change” on page
5-116.
Refer to “Returning to the factory set-
tings” on page 5-148.
Changing the function settings
ECO drive level
Low High
CAUTION
 For safety, stop the vehicle before operating.
While driving, even if you operate the multi-
information display switch, the function set-
ting screen is not displayed.
NOTE
 To return the menu screen to the function set-
ting screen, press and hold the multi-infor-
mation display switch (for approximately 2
seconds or more).
 If no operations are made within approxi-
mately 30 seconds of the menu screen being
displayed, the display returns to the function
setting screen.
BK0254400US.book 143 ページ ２０１７年８月１０日 木曜日 午後１時５０分