Mitsubishi MOTORS Outlander PHEV 2018, Owner'S Manual

Page: 168 / 457

Inside rearview mirror
Features and controls 5-47
5
The day/night knob (A) at the bottom of the
mirror can be used to adjust the mirror to
reduce the glare from the headlights of vehi-
cles behind you during night driving.
When the headlights of the vehicles behind
you are very bright, the reflection factor of
the rearview mirror is automatically changed
to reduce the glare.
Normally, use the automatic mode. When the
operation mode of the power switch is put in
ON, the green indicator (1) illuminates and
the reflection factor of the mirror is automati-
cally changed.
N00589200033
When the operation mode of the power
switch is put in ON, the vehicle’s directional
heading (N, NE, E, SE, S, SW, W and NW)
will be displayed in the visual display (A).
To turn off the electronic compass, press the
switch (1) for approximately 5 seconds.
To reduce the glare
Type 1
1- Daytime position
2- Night position
Type 2
NOTE

Do not hang items on, or spray glass cleaner
on the sensors (2), as reduced sensitivity
could result.
 If you want to stop automatic mode, press
the switch (3) and the indicator (1) will go
off.
To return to automatic mode, press the
switch again or put the operation mode of the
power switch in ON after putting the opera-
tion mode in OFF.
Electronic compass
(if so equipped)
To operate the compass
NOTE
BK0254400US.book 47 ページ ２０１７年８月１０日 木曜日 午後１時５０分